5. Safety
42
•
An electric drive or electrically driven components may only be connected to this electric
cylinder by the appropriate technical staff, in observance of the local connection conditions
and regulations (e.g. DIN, VDE).
•
Permanently monitoring the motor current. By monitoring the motor current, faults can be
detected immediately and hazards originating from the system can be avoided.
•
Wear the necessary personal protective equipment (PPE) at all times during work.
•
If a power supply cable and/or feed line is damaged, the electric cylinder is to be taken out of
service immediately.
•
In case of unusual noise development, the electric cylinder must be taken out of use
immediately.
Safety-relevant devices must be inspected at regular intervals, but at least once a year, for proper
function, damage and completeness.
5.3 Safety signs
The warning and mandatory signs are safety signs that warn of risk or danger.
Information in these assembly instructions on particular hazards or situations on the electric
cylinder must be observed, as failure to do so increases the risk of accidents.
The "General mandatory sign" instructs you to be alert.
Marked information in these assembly instructions requires your particular attention.
They contain important information about functions, settings and procedures. Failure
to observe may lead to personal injury and malfunctions to the electric cylinder or
damage to the environment.
