1. Declaration of incorporation
37
D
e
u
ts
ch
E
n
g
li
sh
Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 12100:2010
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
EN 61010-1:2010
Safety requirements for electrical equipment for measurement, control
and laboratory use - Part 1: General requirements.
EN 61000-3-2:2014
Electromagnetic compatibility (EMC) – Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current
< = 16 A per phase)
EN 61000-3-3:2013
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase and
not subject to conditional connection
EN 55014-1:2006/A1:2009/
A2:2011
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission
EN 55014-2/A1:2001/
A2:2008
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 2: Immunity - Product family
standard
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This
transmission is carried out electronically.
The commercial protective rights remain unaffected by this!
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Minden / 2021-12-20
Michael Amon
Location / Date
Technical Manager
Minden / 2021-07-01
Dr. Gregor Langer
Place/Date
Managing Director
