STEP 7-2 CANOPY ATTACHMENT
Rear Canopy Mount
Front Canopy Mount
STEP 7-3 MAIN / TAIL BLADE INSTALLATION
M4x30 Socket Head Bolt
M4 Lock Nut
M3 Lock Nut
M3x18 Socket Head Bolt
IMPORTANT:
Check the correct way you install the tail blades.
They should turn counter clock wise looking onto
like shown in the diagram above.
IMPORTANT:
Ensure the Main blades are balanced and
correctly fit. The main rotor turn clock wise.
The Blade gribs are 14mm. If necessary add
one 1mm shim up and under the blade if they
are from 12mm.
A30
NOTE:
Put the rubbers grommets for about 3 min. in hot water to insert them
more easier in the canopy.
Tail Blade
3x10x1,5 Washer(2)
3x10x1,5 Washer(2)
Fixing point
NOTE:
Use the Thumb Screws to secure the canopy to the body of
the helicopter
