A17
NOTE:
The size of the linkage rod can variate depending
on the head setup. In the STEP 7-2 will be an
example of setup with the acording sizes of the
linkage rods.
By looking closely, you will notice on the universal
links the letters RJX (on the small) and RJXHOBBY
on the large links. ensure this are always pointed
outside from the ball as shown in the diagram below.
RJX or RJXHOBBY
Link A
Link B
Link C
Use four short links
and two 20mm rod
Use two short and two long
links and two 25 mm rod
Use four long links
and two 70mm rod
STEP 4-12 MAIN ROTOR HEAD ASSEMBLY
Flybar Paddle
M3x3 Set Screw
Flybar Paddle
USE THREADLOCK
View of the completed Assembly
IMPORTANT:
Insure the correct direction
of the Flybar Paddle.
Ensure the two M3x3 Sets Screws
are on the D-Cut of the Flybar.
STEP 4-11 MAIN ROTOR HEAD ASSEMBLY
See STEP 4-15 for Rod lenght example
