A19
STEP 5-1 TAILCASE ASSEMBLY
USE THREADLOCK
IMPORTANT:
Ensure to enter the side with
the screw hole in the tailcase
first, to secure the 14mm pin
with the M3x4 Set Screw.
Pin 14mm
Tail Pulley 17T
Tail Shaft
M3x4 Set Screw
Tailcase
View of the completed Assembly
STEP 5-1TT TAILCASE ASSEMBLY (TT Version)
View of the completed Assembly
USE THREADLOCK
Tail Shaft
Tail Input Shaft
14mm Pin
19T Delrin Bevel Gear
19T Delrin Bevel Gear
M3x4 Set Screw
15,8mm Copper Spacer
TT Tail Case
M3x4 Set Screw
IMPORTANT:
Add 0,2mm Nylon washer to reach a PLAYLESS Gear mesh.Check that the two gears are
perfectly aligned (shown in the picture on the right).Stay on the tight side of the gear mesh.
A exesive play can strip the Delrin gear.
Lub the Bevel Gears regulary.
Aligned
This step is preassembled.PLEASE CHECK AND ADD THREAD LOCK
