Rivet King RK-4500, Instruction Manual

Page: 15 / 30

15
Installing the Connecting Tape Removing the Connecting Tape
1)
Push the magazine latch
1)
Push the magazine
latch
towards the magazine
towards the
magazine
and open it. and open it.
2)
Roll up the connecting
2)
Still holding the trigger,
tape containing the
rivets,
pull the finished
tape
and put it in the
magazine.
upwards.
3)
Feed the tip of the tape
3)
After removing the
tape,
under the plate spring, release the trigger.
and hook the first guide
hole on the back of the
tape on to the feeding
claw.
4)
Close the magazine to
hold
4)
Turn off the air supply,
the connecting tape in and always throw away
place. the mandrels in the
holder.
5)
Connect the air hose and
pull the trigger once.
A rivet will automatically
be fed into the nosepiece.