Rivet King RK-4500, Instruction Manual

Page: 14 / 30

14
4.
Cover the fuel inlet with a rag. (Drawing 3)
5. With the rag still in place, open the cap, and press hard on the
slide pipe with the refilling maintenance bolt. (Drawing 3)
* Check that the gap in Drawing 1-A has disappeared.
6. Cover the fuel inlet with the thumb, and turn the riveter
upside down to move the air in the hydraulic chamber into
the booster cylinder. (Drawing 4)
7. Bring the fuel inlet slowly back to the top again, and
replenish the oil to cover the amount of air bubbles
that appear. (Drawing 5)
8. Repeat steps 6 and 7 2 or 3 times until the air bubbles stop appearing,
then replenish until just short of overflowing and replace the refilling plug.