Rivet King RK-4500, Instruction Manual

Page: 13 / 30

13
Air Removal (Bubbles) and Refilling Methods
Air release and refilling are needed in the following cases.
a.
Operating speed seems to
have slowed
b. After around 20,000 rivetings.
c.
A gap can be seen in the nose tip (Drawing 1-A)
when disconnecting the air coupler.
1. Remove any rivets still attached to the machine, as well as all broken off mandrels.
Wipe off any dirt that may be adhering to part (Drawing 1-A).
2. Stop the air supply. (disconnect the air coupler)
Always disconnect the air
hose when releasing air or
refilling.
3 .
Use the hexagonal wrench (5mm) to remove the refilling
plug.
(Drawing 2)