S-7
13
QTY
Profile
2
G-1
G-2
1
25½”
48½”
Profile
QTY
F-7
1
56”
Connectors
QTY
B-3
2
S-2C
4
S-7
2
Panel
QTY
W-1
1
24” x 57”
WWW.RSIWW.COM
12 of 40
NOTE: VIEW
FROM OUTSIDE.
2.3
Remove plastic film and add the last W-1 panel to complete the side.
From the outside, fit F-7 corner profile into place and use two B-3
connectors with T-bolt assemblies as shown to secure to base.
F-7
B-3
B-3
Slide four T-bolts into bottom bolt track of G-1 gutter profiles. Hand
tighten each end T-bolt to hold in place.
2.4A
Slide five T-bolts into bottom bolt track of G-2 gutter profiles.
Hand tighten end T-bolts to hold in place.
2.4B
G-1
G-1
G-1
G-1
G-2
G-2
Place one T-bolt on the inside
bolt track of the gutter at
each end. Hand tighten both
T-bolts to hold in place.
2.5B
NOTE: VIEW
FROM INSIDE.
NOTE: In some cases a ¼” x ¼” notch
in top corner of W-1 panel will provide
a better fit for G-1 gutter profile.
G-1
W-1
F-7
F-7
G-1
W-1
S-7
2
Working from inside, place G-1 and G-2 gutter profiles, fitting top edge of
W-1 panels into channels of gutters. Place one short G-1 gutter profile at
each end and the longer G-2 gutter
profile in the center. Seams are
centered to bolt tracks in F-1 profiles.
2.5A
G-1
F-7
¼”
¼”
W-1
W-1
W-1
W-1
F-7
F-1
F-1
G-1
G-2
NOTE: At front and
back, edge of G-1
gutter profile lines up
flush with edge of F-7
corner profile.
