Operator's Manual
RE741 Perimeter™ Ladder Pod
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
13. Attach the ladder foot pads (TP113) to the bottom (short)
ladder (TP159) using (2) provided 1/4-20 x 1-1/2” bolts
and locknuts. This step now makes this the bottom ladder
section. SEE FIGURE 9
NOTE: Channel on foot pads should touch on three sides
of the ladder legs.
14. Assemble all ladder sections together and attach them
to the assembled platform in the following order: attach
top ladder (SL51 ladder) onto the J-receiver tubes; attach
middle ladder (SL51 ladder) onto the top ladder; attach
bottom ladder (TP159 ladder with feet) onto the middle
ladder.
NOTE: Make sure foot pads are orientated out, away from
platform.
15. Attach single support brace tabs (TP115) to each joint
location of ladder assembly (6 total locations) and secure
those locations using (6) provided 1/4-20 x 1-3/4” bolts and
locknuts. SEE FIGURE 9
SINGLE SUPPORT
BRACKET TAB
1/4-20 X 1 3/4
BOLT
LOCK NUT
J-TUBE
RECEIVER
1/4-20 X 1 1/2
BOLT
LOCK NUT
LADDER FOOT PADS
(Facing Outwards)
FIGURE 9