Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
11
Operator's Manual
LOCKDOWN 21 2-MAN Ladder Stand
FIGURE
10
19. Ladder sections are assembled on the ground in the
following order: bottom ladder section (15); three middle
ladder sections (14); top ladder section (13) and the treestand
top. SEE FIGURE 10.
20. With all sections assembled together on ground, secure all
sections together using twelve silent knobs (40).
21. Attach stabilizer support tube (19) to the lowest middle
ladder section (14) using 1/4-20 x 2 1/4in wing screw (33) and
wing nut (36). SEE FIGURES 10 & 11.
NOTE: Mounting hole is located just below top ladder rung
on the middle ladder section.
22. Slide the bark biting stabilizer bar (20) into the stabilizer
support tube (19) and secure using 1/4-20 x 1 3/4in wing
screw (32) and wing nut (36). Make sure screw passes through
support tube and stabiizer bar at appropriate hole to achieve
desired distance from tree. Adjustment in length may be
needed when ladder is uprighted later in the Setup and Use
instructions. SEE FIGURES 10 & 11.
NOTE: Uprighting of the stand may be easier with the
stabilizer bar not attached to the ladder. If removed, refer
back during setup.
40
13
14
14
14
15
36
33
20
19
Wing Screw
2 1/4 in
Qty 1
33
Wing
Nut
Qty 2
36
Wing Screw
1 3/4 in
Qty 1
32
FIGURE
10
FIGURE 11
32
36
