manualshive.com logo in svg

Riverbed Steelhead 1050 Series, Installation And Configuration Manual

Share
Download
Riverbed Steelhead 1050 Series Installation And Configuration Manual Download Page 22

22

Steelhead Appliance Installation and Configuration Guide

            

Overview of the Steelhead Appliance

Technical Specifications

To upgrade RiOS software

1.

Download the software image from the Riverbed Technical Support to a location such as your desktop.

2.

Log in to the Management Console using the Administrator account (admin). 

3.

Navigate to the Configure - Maintenance - Software Upgrade page and choose one of the following 
options:

–

From URL

. Type the URL that points to the software image in the text box.

–

From Local File

. Browse your file system and select the software image.

–

Schedule Update for Later

. Select this option to schedule an upgrade for a later time. Type the date 

and time in the Date and Time text boxes using the following formats YYYY/MM/DD and 
HH:MM:SS

. 

–

Click Install Upgrade.

4.

Reboot the appliance.

The software image is quite large; uploading the image takes a few minutes. On model 3020, 3520, 5520 
6020, and 6120 appliances the software can take up to 4 minutes to boot when upgrading for the first time 
to RiOS v5.5.x. This is normal behavior as the software is configuring the recovery flash device. Do not press 
Ctrl-C, unplug, or otherwise shut down the system during this first boot. There is no indication displayed 
during the system boot that the recovery flash device is being configured.

After the upload is complete, you are reminded to reboot the system to switch to the new version of the 
software. After reboot, the software version is displayed on the Home page of the Management Console.

Downgrading the Software

If you are downgrading to a previous version of the Steelhead appliance software, you must downgrade to 
a version of the software that has previously run on your machine. For example, you cannot upgrade from 
v1.2.3 to v2.0 or v2.1 and downgrade to v1.2.8—you must downgrade to v1.2.3 and then upgrade to v1.2.8. 
If you do not follow this step, the system discards your configuration and you cannot recover it.

If you inadvertently downgrade to a software version that is not running on your system, either go back to 
a previously installed revision, or save the text results of a show running-configuration command before 
downgrading, and apply it after the downgrade. For detailed information, see the Riverbed Command-Line 
Interface Reference Manual.

Technical Specifications

The following sections summarize the physical and power specifications for the Steelhead appliance.

Summary of Contents for Steelhead 1050 Series









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands