SteelConnect Access Point Hardware Guide
15
Installing the SDI-AP5R
Mounting the SteelConnect Access Point Appliances
4.
Attach the device to the wall by tightening the bolt’s flat washers and nuts to secure the bracket to
the mounting surface.
Figure 2-5. Securing the AP to the Wall
Pole Mounting the SDI-AP5R
1.
Place the lock and flat washers on the four cap screws and use the screws to attach the bracket to
the back of the AP.
Figure 2-6. Attaching the Bracket
Summary of Contents for SteelConnect SDI-AP3
