14
SteelConnect Access Point Hardware Guide
Mounting the SteelConnect Access Point Appliances
Installing the SDI-AP5R
2.
Drill holes in the four marked locations. Each hole should be 37 mm (1.46 in.) deep and 8 mm (.31 in.)
wide. Hammer the bolts into the openings.
Figure 2-3. Installing the Bolts
3.
Place the lock and flat washers on the four cap screws and use the screws to attach the bracket to
the back of the appliance.
Figure 2-4. Attaching the Bracket
Summary of Contents for SteelConnect SDI-AP3
