16
SteelConnect Gateway Hardware Installation Guide (SDI-130, SDI-330, SDI-1030)
Installing the SteelConnect Gateways
Rack mounting the SDI-1030 gateway
Rack mounting the SDI-1030 gateway
The SDI-1030 gateway ships with the hardware for rack mounting and the rubber feet to attach to the
appliance for desktop placement.
1.
Attach the rack mount ears to the appliance with the included screws.
Figure 2-4. Attaching the rack mount ears
2.
Loosely install the four screws, two on each side, along the back sides of the switch. You will tighten
the screws when the switch is placed in the rack. Set the appliance aside.
Figure 2-5. Attaching the rear rail screws
3.
Determine the placement in the rack and then use the screws that ship with the rack-mount kit to
attach the rails to the rack.
Figure 2-6. Attaching the rails to the rack