manualshive.com logo in svg

Riverbed SteelConnect SDI-1030, Hardware Installation Manual, Page: 10 / 24

Share
Download
Riverbed SteelConnect SDI-1030 Hardware Installation Manual Download Page 10

10

SteelConnect Gateway Hardware Installation Guide (SDI-130, SDI-330, SDI-1030)

            

SteelConnect Overview

SteelConnect SDI-1030 gateway

SteelConnect SDI-1030 gateway

The SDI-1030 is a 1U gateway recommended for medium to large branch offices.

Figure 1-4. SDI-1030 Front panel

The following features can be found on the front panel of the SDI-1030 gateway:

Organic LED (OLED) screen

Reset button

Press the reset button to reboot the appliance.

Hold the reset button for 10 seconds to reset the appliance to the factory default state. The 
LEDs will blink when a reset is in progress.

USB 2.0 port

Serial console port

8 GbE ports (RJ45)

4 10GbE SFP+ ports 

The following features can be found on the back panel of the SDI-1030 gateway:

AC power supply inlet

Grounding screw 

PCIE slot (not supported) 

Figure 1-5. SDI-1030 rear panel

Ethernet Copper Port LEDs

State

Definition

Top left orange

Blinking

Activity

Top right green

On

Link is up

Off

Link is down

Summary of Contents for SteelConnect SDI-1030

























Reviews:

No comments