CO
2
NNEXT
rev.01
EN
76 / 293
2.7.
General Warnings and Rules of Conduct
In order to avoid any risk to persons or damage to the machine, it is advisable to strictly follow the warnings
and general rules of conduct reported here.
DANGER WARNING: the Manufacturer disclaims any liability for any damage to property and/or
persons arising from improper operations carried out by unqualified, untrained or unauthorized
personnel.
x
Operators in charge of operation of the partly-completed machine must be adequately trained to
best use it, with no risk, and must work in a comfortable environment that guarantees the best possible
safety and hygiene conditions.
x
Prior to using the partly-completed machine ensure that any hazardous conditions for safety have
been removed and no operators are present in the danger area near the partly-completed machine.
x
After removing the packaging, make sure all machine parts are intact, otherwise contact your dealer.
x
Before using the partly-completed machine, make sure all guards or other protections are fitted and
that all safety devices are present and working.
x
Carefully read the labels on the partly-completed machine, do not cover them and replace them
immediately if damaged.
x
Do not place containers of liquids on the partly-completed machine.
x
Consult these instructions on the safety provisions in force and the specific PPE to implement for staff
safety; in particular, the staff responsible for the partly-completed machine must wear suitable
clothing, avoiding or paying due attention to:
o
loose clothing,
o
wide sleeves,
o
ties or draping scarves,
o
necklaces, bracelets and rings.
x
Staff responsible for maintenance of the partly-completed machine must be aware of all the
procedures outlined in Chapter 5 - Maintenance and Demolition and have adequate technical
preparation to correctly interpret the instructions and diagrams attached to these instructions and to
intervene on the partly-completed machine.
