CO
2
NNEXT
rev.01
EN
72 / 293
2.3.
Residual risks
To avoid any dangerous condition for persons or damage to the partly-completed machine caused by
residual risks, i.e. those risks that persist despite all provisions implemented, or potential risks which were not
obvious, the manufacturer recommends that maintenance personnel and all personnel in charge of
operating the partly-completed machine strictly follow the warnings indicated in the following pages.
ATTENTION: Always comply with the signs and indications of the plates applied to the machine and
operate exclusively according to the instructions provided in this instruction manual.
ATTENTION: All operations to be performed on the machine must be performed by qualified, trained,
informed or properly equipped personnel.
Residual risk of intoxication
To avoid impacts or damage that could cause leaks of gases dangerous to human health, install the machine
in a dry, protected and sufficiently ventilated place in compliance with the laws of the country of installation.
Residual risk of burns
Before carrying out any work on the machine, make sure that the hot surfaces have cooled down; wear
protective gloves to avoid burns.
