CO
2
NNEXT
rev.01
EN
68 / 293
2.
Introduction on safety
2.1.
Design criteria
In designing the partly-completed machine principles and concepts have been applied according to the
paragraphs on the harmonised standards indicated in Table 3.
STANDA
NAME
EC Directive no. 2006/42
Machine Safety Directive
UNI EN ISO 12100: 2010
Machinery safety
- Fundamental
concepts, main
design
principles - Part 1: Main concepts, general
principles for design
UNI EN ISO 12100: 2010
Machinery safety
- Fundamental
concepts,
main design
principles - Part 2: Technical principles
UNI EN ISO 13857: 2008
Safety of machinery – Safety distances to prevent hazard zones being reached by
upper and lower limbs
UNI EN ISO 14120: 2015
Machinery safety – Guards - General requirements for the design and construction
of fixed and mobile guards
UNI EN 378-1: 2017
Refrigeration systems and heat pumps – Safety and environmental requirements –
Part 1: basic requirements, definitions, classification and selection criteria
UNI EN 378-2: 2017
Refrigeration systems and heat pumps – Safety and environmental requirements-
Part 2: design, construction, testing, marking and documentation
IEC EN 60204-1: 2006
Safety of machinery - Electrical equipment of machines - Part 1: General rules
Table 3 - Main harmonized standards used to design the partly-completed machine
Compliance with the relevant paragraphs of the afore-mentioned harmonised standards has made it
possible to eliminate or reduce risks in the best way possible, both during normal operation and during
maintenance operations.
The components used have been carefully chosen from those available on the market; the materials the
partly-completed machine is made of involve no risks to the health and integrity of persons. All parts supplied
by third parties are CE-marked (when envisaged) and comply with the relevant directives of reference. All
components have been strictly controlled in accordance with the quality standards prescribed by the current
regulations.
For the partly-completed machine, the necessary warning and protection measures have been adopted in
relation to the residual risks (see, in this regard, Section 2.3 "Residual Risks").
