3
Schranksystem VX IT / VX IT enclosure system / Baies VX IT
Contents
Page
1.
Notes on documentation
1.1
Declarations of conformity
and approvals
1.2
Storing the documents
1.3 Symbols
used
1.4
Other applicable documents
1.5
Normative references
1.6
Country-specifi c references
2.
Safety instructions
2.1
Intended use
2.2
User groups to
IEC 62 368
2.3
Safety instructions
–
Explanation of
safety symbols
3.
Device description
3.1
Function description
and components
3.2 Labelling
3.3
Scope of delivery
4.
Assembly and siting
4.1
Site requirements
4.2
Required tools
4.3
Assembly procedure
4.3.1
Releasing the packing bands
and unpacking
4.3.2
Reading the instructions
4.3.3
Removing the
enclosure panels
–
Dismantling the
aluminium front doors
– Dismantling the rear doors
– Dismantling the rear panel
– Dismantling the side panels
Page
4.3.4
Removing any accessories
supplied loose
4.3.5
Lifting the rack off of the pallet
4.3.6
Removing the cardboard
from the bottom
–
Optional installation of
the base/plinth
–
Installing castors or
levelling feet
4.3.7
Moving the rack to
the installation site
4.3.8
Preparing for installation
–
Depth adjustment of the
482.6 mm (19˝) level
–
Width adjustment of the
482.6 mm (19˝) level
– Moving the swing frame
–
Swing frame –
Swapping the hinges
4.3.9
Baying the rack (optional)
4.3.10 Securing the rack to the fl oor
4.3.11
Installing/modifying
gland plates (optional)
5. Transport
6.
Installation
6.1
Installing the
customer hardware
6.2
Installing the power and
network cables
– Cable entry in the roof
–
Dismantling/assembling of
the roof plate (optional)
– Venting the roof plate (optional)
– Cable entry in the base
–
Cable management
accessories 82
6.3
Connection points,
protective earthing, electrical
safety, accessory kits for
protective earthing
Page
6.4
Re-installing the removed
enclosure panels
– Fitting the rear doors
– Fitting the rear panel
– Fitting the side panels
–
Fitting the aluminium front door –
r/h door hinge
–
Fitting the aluminium front door –
l/h door hinge (swapping hinge
to opposite side)
–
Fitting the sheet steel door –
l/h door hinge (swapping hinge
to opposite side)
6.5 Other
accessories
7. Commissioning
8.
Operation
9.
10.
Inspection and maintenance
11.
Storage and disposal
12.
Technical
specifi cations
–
482.6 mm (19˝) mounting
angles, standard
–
482.6 mm (19˝) mounting
angles, dynamic
– Empty enclosure
13.
Spare parts
14. Warranty
15.
Customer services addresses 103