2.12
Safe operation
The system described here was manufactured in accordance with state-of-the-art
technology and recognized safety rules and exhibits a high degree of operational
safety.
Nevertheless, improper or non-intended use / application of this system can cause
impairments to the system or to other assets.
The system must only be used in a fully functional, undamaged state.
The information provided in this operating instruction regarding installation, opera-
tion and maintenance of the system is intended to aid proper, safe and failure-free
operation. As regulations in this regard can deviate from each other due to world-
wide use, the applicable national regulations and laws at the site of operation are to
be observed in so far as they contradict the information provided in this operating
instruction. As a general rule, the following information in particular is to be
observed / adhered to:
● National safety and accident prevention regulations.
● National standards and laws; in particular those concerning hazard detection
systems.
● National assembly and construction regulations.
● Generally recognized rules of technology.
● This operating instruction and the warnings and safety instructions contained
within it.
● Parameters and technical data of this system.
If it can be assumed that safe operation is no longer possible (e.g. in the event of
damage), the system is to be taken out of service immediately and secured against
accidental commissioning.
2.13
Spare parts
Only original spare parts may be used
Chapter 11 „Spare parts, accessories, con-
sumables and tools” on page 75
.
Safety
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US
19
