L
WARNING
Danger due to misuse!
Misuse of the system can lead to personal injury and property damage.
● No structural changes to the device to be protected or to the system may be
performed.
● Do not use the device to be protected in any way that is contrary to that which
was considered by the trained Authorized Distributor.
● Do not block the discharge nozzles.
The system must
not
be used for the following incendiaries:
● Chemicals that release oxygen.
● Mixtures containing oxidizing substances (e.g. sodium chlorate, sodium nitrate,
explosives, gunpowder).
● Chemicals capable of thermally decomposing autonomously (e.g. certain organic
peroxides).
● Reactive metals (e.g. sodium, potassium, magnesium, titanium or zirconium) and
reactive hybrids or metal amides.
The system must
not
be used under the following operating conditions:
● Hot surfaces above 500 °C (932 °F), which due to operational conditions have
been heated to temperatures in excess of the extinguishing agent’s decomposi-
tion temperature.
2.5
Structural changes
This system has been tested for the intended use. Consult an Authorized Distributor
if changes to the device are planned.
2.6
Basic dangers
The following section describes remaining risks that can arise from the system even
with intended use.
In order to reduce risks of personal injury and property damage and avoid dan-
gerous situations, the safety instructions listed here and the safety instructions in the
other sections of this operating instruction must be followed.
Safety
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US
12
