7 Cleaning and maintaining the automatic machine
Ritta l crimping machine R8-I
We reserve the right to make technical m odifications
21
EN
Fig. 10:
Conductor holding tongs
7.5
Maintaining the stranded wire fixing unit
Fig. 11:
The stranded wire fixing unit at the operational position (A) and pulled forwards (B)
◼
Clean the feeding funnel (fig. 11, item 1) with a brush.
◼
If required, use a soft cloth and methylated spirits.
Additional monthly maintenance:
◼
Pull the stranded wire fixing unit forwards (fig. 11, item B).
◼
Check whether the rollers (fig. 11, item 2) are smooth-running.
If required, oil the pivot points of the rollers.
◼
Oil the pivot points (fig. 11, item 3) of the stranded wire fixing unit.
7.6
Maintaining the insulation stripping unit
◼
Ensure that the stranded wire fixing unit is at the front position.
◼
Push the tool unit backwards and swivel it to the right.
1
1
2
2
2
2
3
4
3
1
A
B
