7 Cleaning and maintaining the automatic machine
18
We reserve the right to make technical modifications
Rittal crimping machine R8-I
EN
◼
Press
until the desired language is displayed.
The selected language is accepted immediately
◼
To return to the production menu, press C or select a different menu with the
arrow keys.
6.8
Service display
1. Production menu
Ready
Unit is operational
––––––
Service
––––––
The service display appears after every
400,000 work cycles.
Step:
2/0
C
E
The service display flashes three times when the automatic machine is switched on.
The automatic machine is then operational.
Note:
To retain the performance of the automatic machine as long as possi-
ble, you should observe the prescribed service intervals:
–
Minor service after 400,000 work cycles
–
Major service after 800,000 work cycles
◼
Contact your responsible Rittal country representative.
6.9
Switching off the automatic machine
◼
Switch off the automatic machine.
The valve release can be heard and the display is cleared.
7
Cleaning and maintaining the automatic machine
7.1
Cleaning the automatic machine exterior
The automatic machine should be freed regularly from dust. If necessary, its exte-
rior must be cleaned.
Note:
The cleaning of the interior is included in the maintenance; this may
be performed only by instructed personnel.
◼
Ensure that the automatic machine is switched off.
Attention!
The display can be damaged!
Unsuitable cleaning agents can scratch or damage the display.
◼
Clean the display carefully either with a special cleaning cloth suitable for dis-
play surfaces or with a soft cloth and a screen cleaning agent.
◼
Clean the surface of the automatic machine with a moist cloth. If required, use a
soap-based cleaning agent. Never use aggressive cleaning agents or solvents.
