11
•
Check harrow tine tension before use. Ensure that long sections do not sag more than
1.5” (38
mm).
•
Grease all pins and knuckles. (See decals locations)
•
Grease harrow chain bearings.
•
Visually inspect hydraulic hoses & fittings for leaks or damage.
•
Visually inspect unit for loose, worn or damaged components.
•
Coat any exposed cylinder shafts with thick oil or grease.
•
Ensure that parking jacks are situated on firm ground. Failure to do so may cause the hitch unit to
tip over during storage.
•
Lock all applicable safety pins into place.
NOTE: All fasteners with locknuts that are used to join moving pieces should not be
tightened completely to allow for movement.
