15
1.
Ensure harrow is properly attached to the 3
-
Point hitch per previous instructions and all hydraulic
hoses are firmly attached to the tractor hydraulic remotes.
2.
Upon entering the field, park the tractor on level ground with a clear radius of
30’ (9.2
m) to allow for
wings to fold down and not make contact with any obstacles.
3.
Ensure that the 3
-
Point hitch is fully raised prior to extending the wing lift/lower cylinders (
hydraulic remote) to bring the two wings to a level position parallel to the main beam on the main
frame.
4.
Exit the tractor to remove the transport lock pins from each of the three harrow section pivot loca-
tions (fig. 2). Store the lock pins in the provided holders on the end of each lift arm (fig. 1).
5.
Slowly lower the unit using the 3
-
Point hitch control while slowly driving the harrow forward to en-
gage the harrow sections with the ground.
NOTE:
•
Do not lower the harrow wings fully down to the ground without driving ahead simultaneous-
ly. Damage to your rotary harrow sections could result.
•
Check the level of sections per the previous instructions. Adjust unit level as required.
•
Ensure all harrow chains are tight. Tighten chains using the tools provided on the main
frame if necessary.
Transport lock pin locations
