RITEWAY HH-8200, Operator'S Manual

Page: 41 / 84

9
1 105 - 1259 DRAFT ARM PULL LUG PIN, EXTENDED (1 - 1/4")
2* 105 - 1310 8290 LEFT WING WELDMENT
2* 105 - 1311 8290 RIGHT WING WELDMENT
3 105 - 1330 8290 A - FRAME (X - STYLE)
4 110 - 1249 8290 DRAFT ARM WELDMENT (1 - 1/4” DIA.)
5 110 - 1254 8290 CENTRE BAR WELDMENT (2 - 1/2” DIA. PIN)
6* 110 - 1291 RIGHT LOCK ARM WELDMENT
6* 110 - 1292 LEFT LOCK ARM WELDMENT
7 112 - 0323 LOCK ARM WELDMENT
8 105 - 1326 TIE BAR WELDMENT
9 112 - 0487 8290 SWING ARM WELDMENT
10 112 - 0504 DRAFT ARM CLEVIS WELDMENT (1 - 1/4” Ø BOLT)
11 113 - 0071 2 - 1/2” DIA. KNUCKLE WELDMENT
12 123 - 3801 2 - 1/2” DIA. KNUCKLE PIN WELDMENT
13 403 - 0267 1 - 1/2” X 12 - 1/2” AUTO FOLD SPRING
14 410 - 0213 1/4 X 122” CABLE C/W TURN BUCKLE & 2 JAWS
15 416 - 0004 1/4 GREASE ZERK, STRAIGHT
16 526 - 0824 1/2 X 3 CAPSCREW, NC, GR.5, PLTD.
17 526 - 1052 5/8 X 6 - 1/2 CAPSCREW, NC, GR.5, PLTD.
18 526 - 1644 1 X 5 - 1/2 CAPSCREW, NC, GR.5, PLTD.
19 526 - 6103 3/8” STOVER LOCK NUT, NC, GR.5, PLTD.
20 526 - 6105 1/2” STOVER LOCK, NC, GR.5, PLTD.
21 526 - 6106 5/8” STOVER LOCK NUT, NC, GR.5, PLTD.
22 526 - 6109 1” STOVER LOCK NUT, NC, GR.5, PLTD.
23 526 - 6210 5/8” HEX NUT, NC, GR.5, PLTD.
24 530 - 1000 5/8 X 3 CAPSCREW, NC, GR.8, PLTD.
25 530 - 1246 BOLT, 3/4 - 10 UNC - 1.5, GR.8, YELLOW ZINC PLATED
26 546 - 0199 3/8” X 4 EYE BOLT, NC, PLTD.
27 550 - 5206 3/8” FLAT WASHER, PLTD.
28 550 - 5212 3/4” FLAT WASHER, PLTD.
29 550 - 5316 WASHER, FLAT, 1" - SAE, GR.5, YELLOW ZINC PLATED
30 551 - 5010 5/8” SPRING LOCK WASHER, PLTD.
31 558 - 2059 5/32” X 2 - 5/16” #7 HITCH PIN CLIP, PLTD.
32 560 - 0808 1/2” X 1 - 3/4” CLEVIS PIN (JUMBO)
33 805 - 6005 PULL LUG SPACER, 1/4"
34 805 - 6014 2 - 1/4” X ¾ ” SPACER
35 805 - 6021 2 - 1/4” X 1 - 3/8” SWING ARM OFFSET LOCK COLLAR
36 805 - 7608 2 - 1/2” X 1 - 3/8” COLLAR
37 827 - 0077 PIN, 1 - 1/4" OD, CR 1045, 5", END THREADED 1"UNC
38 827 - 0078 PIN, 1 - 1/4" OD, CR 1045, 6 - 1/8", END THREADED 1"UNC
39 835 - 2001 20 GA. SHEET – 10 - 1/4” X 1 - 1/2” SHIM