RITEWAY HH-8200, Operator'S Manual

Page: 27 / 84

20
• The Tine sections are fully adjustable based on your preferences and tine wear.
• Levelling:
•
Before leveling the sections ensure the lift arms are properly leveled (Page 19)
• To level the section relocate the tine section pins in holes 1 - 3 (fig 12).
• To bring the rear down, use rear #1 and front #3.
• To bring the front down, use rear #3 and front #1.
• The #2 setting can be used for less aggressive adjustments.
• Down pressure:
• The down pressure can be adjusted by moving the spring position on the top of the lift arm,
in holes A
- C and D (fig 9).
• For minimum downpressure, move the spring to hole A.
• For maximum downpressure, move the spring to hole C.
• Adjust D to tension the spring so that a piece of paper can slide between the coils.