RITEWAY HH-8200, Operator'S Manual

Page: 21 / 84

14
• In transport position, the maximum turning angle is 40°. Turning too tight will cause severe damage to
the machine.
• Always choose a level area when folding the unit in or out of transport mode.
• Lubricate all pins, axles and bearings regularly to prevent premature failure.
• Clean hydraulic hose ends prior to coupling with tractor hydraulic system.
• The HH - 8290 requires three sets of hydraulic remotes to operate the machine, further detailed in this
section.
• Move the tractor into position where the pin can be inserted into the draw bar hitch (fig. 1).
• If the hitch is too high, you can lower the hitch by adjusting the jack(s) on the wings.
• Retract the hitch parking jack and pin up in the sideways position
• Retract the wing parking jack(s) and pin in storage stub on harrow lift arm
NOTE: Use a clevis - type tractor hitch with a
retained type of hitch pin.
NOTE: Ensure that the parking jack handle is
secured by chain prior to moving the machine.
Failure to do so can destroy the jack handle.
• Hook up the three hydraulic circuits to your tractor
remote.
Recommended Hydraulic Connections:
– Remote 1 – Tine angle adjust
– Remote 2 – Wing lift/lower
– Remote 3 – Wing wheel pivot
• Always choose a level area when folding unit either to or from transport position.
• Lubricate all pins, axles and bearings regularly to prevent premature failure of components.