RITEWAY HH-8200, Operator'S Manual

Page: 3 / 84

– Wing lift/lower
– Tine angle adjust
– Wing wheel pivot
• IMPORTANT: Ensure the center harrow section has been rotated forward after shipping and bolted
in place or damage to the unit may result.
• Find a location that is as level as possible. Position harrow in line with tractor.
•
Remove lock pins from wing lift and wing pivot wheels.
• From the cab of the tractor, rotate pivot wheels to 45° ( hydraulic remote).
• Slowly back up the tractor to unfold.
• Once wings are nearly fully unfolded, rotate pivot wheels to 90°.
• Ensure that the draft arms have pushed the swing arms into the lock mechanism.
• Carefully lower the harrow wing halfway to the ground ( hydraulic remote). Ensure that
the swing arms are both still locked in place.
• Slowly drive the tractor ahead, while lowering the harrow wing the rest of the way down.
• IMPORTANT: Do not lower the harrow wings fully down to the ground without driving ahead simul-
taneously. Damage to your rotary harrow sections could result.
• Check the level of A - frame hitch relative to the tractor. Adjust using hitch tongue to level
• Ensure all harrow chains are tight. Tighten chains using the tools provided on the left - most rotary
harrow section if necessary.