Riso MH 9350, User Manual

Page: 82 / 218

Chapter 3 Functions for Master Making
80
14
Press the [START] key.
Scanning of the original starts.
The rest of the procedure is the same as the
normal printing operation of paper originals.
(
A
35 “Printing of Paper Originals”)
One-Touch Operation for 2-Up
Printing [2 Up]
■
Final images
1
Placement of Originals
Place an original in the direction shown below.
2
Place the paper.
Place the paper in the direction of a short edge
paper feed.
B
To cancel [Multi-Up Print], perform
step 5 again and display the setting
screen. Touch [OFF] and then [OK].
The process for laying out multiple originals on a sin-
gle sheet of paper is referred to as [Multi-Up Print].
The [2 Up] function enables 2-up printing (laying out
two copies of an original side by side) of [Multi-Up
Print] (
A
75) to be performed with fewer steps.
B
You cannot use this function with the fol-
lowing functions.
C
[Book Shadow] (
A
57)
C
[Layout] (
A
73)
C
[Top Margin Adj.] (
A
81)
C
[Binding Margin Adj.] (
A
82)
C
[Separation] (
A
59)
C
[Rec. Preview] (
A
69)
C
[Quick Master Making] (
A
59)
C
[Auto] under [Format] (
A
133)
B
When [2 Up] is set, [Auto 90°Rotation]
(
A
141) under [Admin.] cannot be used.
B
Use a standard size of paper. You
cannot use custom size paper or
paper that are registered in
[Admin.].
1 1
Paper feeding direction
Short side
Long side