Riso MH 9350, User Manual

Page: 37 / 218

Chapter 2 Basic Operations
35
2
Printing of Paper Originals
Dual-color printing
This section describes the procedure to perform dual-
color printing by using an original for print drum (cylin-
der) 1 (first page) and an original for print drum (cylin-
der) 2 (second page).
This machine makes a master of the side that is
scanned first (first page) for print drum (cylinder) 1,
and makes a master of the side that is scanned sec-
ond (second page) for print drum (cylinder) 2.
1
Check that the power switch of
this machine is on.
Press the [
X
] side of the power switch.
2
In the [HOME] screen, touch [
m
Dual-Color].
3
Touch [MasterMake].
The master making basic screen for dual-color
mode is displayed.
4
Place an original for print drum
(cylinder) 1.
(
A
33 “Placement of Originals”)
5
Check the paper.
(
A
30 “Setting up the paper feed tray and the
paper”)
This section describes the procedure to scan and
print paper originals.
B
By using the following functions, you can
assign one area of an original to print drum
(cylinder) 1 and another area of the original
to print drum (cylinder) 2 in order to per-
form master making (separation) for dual-
color printing.
C
[Separation] (
A
59)
C
[Rec. Preview] (
A
69)
C
[Editor]
B
When an authentication screen
(
A
24) is displayed, follow the
instructions on the screen.
First page Second page
Final
B
In dual-color mode, you cannot
use double-sided originals.
B
Place the original for print drum
(cylinder) 1 over the original for
print drum (cylinder) 2 when you
overlap the two originals on the
auto document feeder.
B
The size of the placed original is dis-
played in [Page] in the master mak-
ing basic screen. If the displayed
size is different from the size of the
placed original, place the original
again.
B
The paper sizes that can be used
for dual-color printing are limited.
(
A
15 “Paper size”)