Riso MH 9350, User Manual

Page: 143 / 218

Chapter 7 Setting the Operation Conditions
141
7
[Send Error History]
You can send the error history to the RISO management server.
Operate according to the displayed mes-
sages.
B
This function is displayed only when the customer’s con-
sent is obtained. Use this function when you receive
instructions from your dealer or authorized service repre-
sentative.
[Margin-Plus Rate]
You can change the reduction rate that is applied to the setting of
[] (
A
70).
90 to 94 to 99%
[Auto 90°Rotation]
When the original and paper have the same size but different
directions, the image is automatically rotated to make a master.
OFF, ON
[Clock/Calendar]
You can adjust the internal clock of this machine (
A
165).
Year, Mnth, Day, Hour, min
[Multi-Up Interval]
When [Multi-Up Print] (
A
75) is set to on, if a certain amount of
time has elapsed without the next original being placed, master
making starts automatically. This certain amount of time is referred
to as [Multi-Up Interval].
15 seconds, 30 seconds
[Scanning Interval]
In dual-color mode, set the time interval before the original for print
drum (cylinder) 2 is placed.
5 minutes, Limitless
[Reserve Period]
Even if this machine has been left untouched after the operation
stops, master making of the received original data does not start
until a certain amount of time has elapsed. This certain amount of
time is referred to as a “reserve period”.
OFF, 15 seconds, 30 seconds, 60 seconds
[Ex. Reserve Period]
You can change the extended time of [Reservation] (
A
117).
5 minutes, 10 minutes, 30 minutes
[Auto Clear]
You can set a value to be returned to its default setting if this
machine has not been used for a certain amount of time. You can
also change the time before the value is returned to its default set-
ting.
OFF, ON
[Waiting Time]: 1 to 5 to 60 minutes
[Power-OFF Schedule]
You can set this machine power to be turned off at the specified
time.
OFF, ON
[Hour]: 0 to 23
[min]: 0 to 59
B
The power does not turn off if this machine is being used
or receiving original data when the specified time has
arrived.
[Auto Power-OFF]
You can set the power so it is turned off if this machine has not
been used for a certain amount of time.
OFF, ON
*
[Waiting Time] * : 1 to 99 minutes
*
The factory default setting depends on the desti-
nations of the model.
[User Management]
This setting enables individual user management and enhanced
security.
A
149 “User Management”
Setting item Description