Riso MH 9350, User Manual

Page: 119 / 218

Chapter 5 Useful Functions
117
5
2
Touch [Clear].
3
Touch the button that you want to
erase.
The [Status Check] screen is displayed.
4
Check the settings.
Check whether the setting can be erased.
5
Touch [OK].
The [Job Memory] screen is displayed.
6
Touch [Close].
The basic screen is displayed.
Extending the Reserve Period
[Reservation]
■
The reserve period does not start count-
ing during the following operations.
• While an operation (master making, printing pro-
cess, etc.) is in progress on this machine.
• While any key or button of the control panel is being
operated.
• While a setting screen is displayed.
• While an error or a warning screen is displayed.
• Up to 3 minutes after you switch to master making
mode.
■
The following functions are not performed
during the extended period of the reserve
period.
• [Auto Sleep] (
A
143), [Auto Power-OFF] (
A
141):
These functions are performed based on the time
measured from the end of the period that is set in
[Reservation].
• [Power-OFF Schedule] (
A
141):
This function is not performed until the set time on
the next day.
1
Touch [Reservation] in the [Func-
tions] tab screen.
This function is useful when this machine is con-
nected to a computer.
During the printing operation on this machine,
another person may send a print instruction for the
original data from a computer.
Even if this machine has been left untouched after
the operation stops, master making of the received
original data does not start until a certain amount of
time has elapsed. This certain amount of time is
referred to as a “Reserve Period”.
When the reserve period has elapsed, another
master making of the original data starts. As a
result, the master that is being used is discarded.
The factory default of the reserve period is 15 sec-
onds. You can extend this period in the [Admin.]
screen up to 60 seconds.
When you want to continue the printing operation
with the master that you are currently using, turn on
[Reservation]. You can extend the reserve period up
to 30 minutes.
B
You can change the reserve period in
[Reserve Period] (
A
141) under [Admin.].
B
You can change the extended time when
[Reservation] is turned on in [Ex. Reserve
Period] (
A
141) under [Admin.].
B
If you want to print original data dur-
ing the [Reserve Period], touch
[Pause] (
A
41) in the [Basic] tab
screen.