manualshive.com logo in svg

Riso MH 9350, User Manual

Share
Download
Riso MH 9350 User Manual Download Page 135

Chapter 6 Functions for Scanning

133

6

Changing the owner name

You can change the owner name as desired.

1

Touch [Owner] in the scan basic 
screen.

2

Touch [Rename] in the [Owner] 
screen.

3

Touch the owner whose name you 
want to change.

4

Change the owner name in the 
[Rename] screen.

(

A

 27 “[Rename] screen”)

5

Touch [OK].

Setting the Saving Size of the 

Original Data [Format]

1

Touch [Format] in the scan basic 
screen.

2

Touch the size that you want to 
set.

3

Touch [OK].

You can set the saving size in the following cases:
• If the size of an original has not been automati-

cally detected

• If you want to save original data with a size that is 

different from the original size

B

This item is set to [Auto] by default. When 
a standard size original (A4, B5, etc.) is 
used, the size is automatically detected.

B

You cannot use [Auto] with the following 
functions.

C

[Layout] (

A

 73)

C

[Multi-Up Print] (

A

 75)

C

[2 Up] (

A

 80)

Summary of Contents for MH 9350



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands