Riso GOCCOPRO 100, User Manual

Page: 53 / 94

3
Settings for More Convenient Use
51
3
1) Enter the outer length of the frame using the 0
to 9 Keys.
Ex. When the frame length i s 3 1.50" / 800 mm,
enter " 3 1_5” (800).
2) Press the <ENTER> Key.
The entered frame s ize i s regi s tered in the
machine.
4
To proceed to register other frame sizes, repeat
steps 2 to 3.
5
To end the registration, press the <CUSTOM
SETTING> Key.
The <CUSTOM SETTING> Indicator goe s o u t.
The frame regi s tration ha s been completed.
Yo u can s elect the regi s tered frame s by pre ss ing the
<FRAME SELECT> Key.
To correct the entered frame length, pre ss the
<C> Key to delete the entered val u e.
• Pre ss ing the <CUSTOM SETTING> Key
before pre ss ing the <ENTER> Key cancel s the
s etting and ret u rn s the machine to normal
mode.
• Pre ss ing the <START> Key before pre ss ing
the <ENTER> Key fixe s the s etting and ret u rn s
the machine to normal mode.
Erasing the registered frame:
Era s e it in the following s tep s .
1
Press the <CUSTOM SETTING> Key.
The <CUSTOM SETTING> Indicator i s lit.
2
1) Enter the number of the frame to be erased
from the 0 to 9 Keys.
Ex. To era s e Frame 3 , enter " 3 ".
2) Press the <ENTER> Key.
3
1) Press the <C> Key to erase the registered
value.
2) Enter "0".
3) Press the <ENTER> Key.
4
Press the <CUSTOM SETTING> Key.
The <CUSTOM SETTING> Indicator goe s o u t.
Column