Riso GOCCOPRO 100, User Manual

Page: 14 / 94

12
Image Area
• Minim
u m Image Area: 0. 3 9" (width)
×
0. 3 9" (length)/
10 mm (width)
×
10 mm (length)
• Maxim u m Image Area: 11.69" (width)
×
3 1.50" (length)/
297 mm (width)
×
800 mm (length)
If the s ize of the original data exceed s the maxim u m width
11.69" / 297 mm of the image area, any part o u t s ide the
image area will not be tran s ferred to the s creen.
The Margin Size Required for
Screen Making
Since the original data i s to be placed in the center of the frame
us ed when an imaged s creen i s prod u ced, margin s are left on
the Top and End s ide s of the original data. Margin s are req u ired
on both the Top and End s ide s a s s pace s for attaching the
imaged s creen to the frame and apply ink s .
The margin s ize i s a u tomatically calc u lated ba s ed on the s ize
or length of the frame us ed and the s ize of the original data.
The s ize of the margin req u ired for each frame type i s a s indicated in the table below.
The frame us ed can be s elected us ing the <FRAME SELECT> Key on the Control
Panel.
If the margin
s ize i s in su fficient d u ring s creen making, an <LENGTH> error occ u r s
and an imaged s creen cannot be prod u ced.
"When an Error Indicator Lights" on page 62
Minimum
Width: 11.69˝ / 297 mm
Length: 31.50˝ / 800 mm
Width: 0.39˝ / 10 mm
Length:
0.39˝ / 10 mm
〜
Maximum
Data transferred onto a screen
Data not transferred onto a screen
Maximum image area
31.50 ˝ / 800mm
11.69
˝
/
297mm
Screen master width
12.60
˝
/ 320mm
Frame length
(screen master length)
Margin size
on the End side*
Original data length
Margin size
on the Top side*
Frame length (screen length)
Screen master
feed direction
* The margin s ize s on the Top and End s ide s can be
arbitrarily s et.