3.1.6.2.3 Elbow value of output 2
This screen appears only when Elbow function is enabled.
This screen allows the user to set the Elbow value of Output
2,(considerd as DC Voltage).
The Elbow value can be set any
value between set Start value of
Output and End value of Output.
Pressing the “
Down” key will
enter the “New/Change Elbow
value of the Output 2 edit” mode.
Pressing “
Up” key will confirm
the present value as Elbow value of
the Output 2 and exit setup menu.
(*Denotes that digit will be
flashing).
Pressing the “
Down” key will
scroll the value of the first digit
from 0 through to 1, the value will
wrap from 1 round to 0 depending
the set End value of Output.
Pressing the “
Up” key will
advance the operation to the next
digit and set the first digit, in this case to “0”.
Enter New / Change Elbow value
of the Output 2, first digit entered,
prompting for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second digit
from 0 through to 9, the value will
wrap from 9 round to 0 depending the set End value of Output.
Ú
Ù
Ú
Ù
Ú
33
Summary of Contents for RISH CON - V
