Rishabh RISH CON - V, Operating Manual

Page: 17 / 68

(* denotes that digit will be
flashing).
Pressing the “ Down” key will scroll the value of the fourth
digit from 0 through to 9, the value will wrap from 9 round to 0.
Pressing the “
Up” key will advance the operation to the
“New / Changed Address value confirmed” and set the fourth
digit, in this case to “6”.
New/changed Address value confirmed.
Pressing the “ Down” key will
re-enter to the “New / Change
Address value edit” mode.
Pressing the “ Up” key will
confirm New Address value and
advance to Baud Rate selection
(section3.1.3.2) .
3.1.3.2 RS 485 Baud rate
This screen allows the user to set
Baud Rate of RS 485 port.
The values displayed on screen
are in kbaud ..
Pressing the “ Down” key will
enter the “Baud Rate edit” mode
and scroll the value through 2.4,
4.8, 9.6 , 19.2 and back to
2.4(values are flashing).
Pressing “ Up” key will confirm the present value as
Baud rate & advance to the Parity
Selection (section3.1.3.3).
RS 485 Baud Rate confirmation
Pressing “ Down” key will be re-enter into the “Baud Rate
Ú
Ù
Ú
Ù
Ú
Ù
Ú
15