Rishabh RISH CON - V, Operating Manual

Page: 32 / 68

New/changed Elbow value of the Output 1 confirmed.
Pressing the “ Down” key will
re-enter to the “New / Change
Elbow
value of the Output 1”.
Pressing the “ Up” key will
confirm New
Elbow
value of the
Output 1 and advance to the
O u t p u t 2 c h a r a c t e r i s t i c s
setting (section 3.1.6.2).
3.1.6.2 Output 2 Characteristics Setting
3.1.6.2.1 End value of output 2
This screen allows the user to set the End value of Output2,
(considered as DC Voltage).
The End value of Voltage Output fixed at 10V.
Pressing the “ Down” value
remains constant because End
value is fixed.
Pressing “ Up” key will set the
present value as End value of the
Output 2 and advance to the Start
value of Output selection
(section3.1.6.2.2).
3.1.6.2.2 Start value of output 2
This screen allows the user to set
the Start value of Output 2,
(considered as DC Voltage).
Start value of Output can be set
up to 20% of End value of Output.
Pressing the “ Down” key will
Ú
Ù
Ú
Ù
Ú
30