Pressing the “ Up” key will advance the operation to the
next digit and set the second digit, in this case to “0”.
Enter New / Change Start value
of Input, second digit entered,
prompting for third digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the third digit
from 0 through to 9, the value will
wrap from 9 round to 0
depending on set value of End value of Input. Pressing the “
Up” key will advance the operation to the next
digit and set the third digit, in this case to “5”.
Enter New / Change Start value
of Input, third digit entered,
prompting for fourth digit.
(*denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the fourth digit
from 0 through to 9, the value
will wrap from 9 round to 0
depending on set value of End vale of Input.
Pressing the “ Up” key will advance the operation to the
“New / Changed Start value of Input” & set the fourth digit, in
this case to “0”.
New/changed Start value of Input confirmed.
Pressing the “
Down” key will re-enter to the “New /
Change Start value of Input edit” mode.
Ù
Ú
Ù
Ú
Ù
Ú
21
Summary of Contents for RISH CON - V
