Enter New / Change Start value of
the Output 2, third digit entered,
prompting for fourth digit. (*
denotes that digit will be flashing).
Pressing the “
Down” key will
scroll the value of the fourth digit
from 0 through to 9, the value will
wrap from 9 round to 0.
Pressing the “
Up” key will advance the operation to the
“New / Changed Elbow value of the Output 2 confirmation”
and set the fourth digit, in this case to “0”.
New/changed Start value of the Output 2 confirmed.
Pressing the “
Down” key will
re-enter to the “New / Change
Start
value of the Output 2”.
Pressing the “
Up” key will
confirm New Start value of the
Output 2 and advance to the
Elbow value of Output setting
(section 3.1.6.2.3) or exit setup
menu, If elbow not enabled.
3.1.6.2.3 Elbow value of output 2
This screen appears only when
Elbow function is enabled.
This screen allows the user to set
the Elbow value of Output2
(considered as DC Voltage).
The Elbow value can be set any
value between set Start value and
End value of Output.
31
*
Summary of Contents for RISH CON - I
