1. Introduction
The Current Transducer is a DIN Rail/wall mounted 43.5 X
65.5mm Transducer.
Input
Current and Output Voltage / Current is displayed on LCD
and indicated by LED’s.
The Current Transducer is used to measure and convert AC
Current input into proportional DC current or voltage output
signal. Output signal generated is proportional to the True
RMS (upto 15th Harmonic) of the input Current.
Current Transducer can be
configured and programmed at
site for the following CT Primary
,CT Secondary (1A to 5A) , Input
Characteristics (i.e start, end and
elbow value of Input) and Output
parameters (i.e as Voltage or as
Current and Characteristics of
start, end and elbow value of
outputs).
A
A
1.1 LED Indication
3
Green LED Continuous ON
Green LED Continuous ON
Green LED Continuous ON
Red LED Continuous ON
Red LED Continuous ON
LED Operating Status
Output1 Voltage
Output1 Current
Output2 Voltage
Output2 Current
O/P 2
ON
O/P 1
LED
LED Operating Condition
Aux. Supply healthy Condition
The front panel has two keys through which the user may
scroll through the output screens and configure the product.
Summary of Contents for RISH CON - I
