__________________________________
【
【
【
【
2
】
】
】
】
2.1.4. ATX Power ON/OFF Switch
:
PW-BN
1. If "Power Button Over Ride" of Power Management Setup is setted
to "Instant Off"
When the system is OFF, press This button system will ON.
To turn the system OFF, press this button again.
(The Switch connect to a two-pin push bottom.)
2. If "Power Button Over Ride" of Power Management Setup is setted
to "Delay 4 sec."
When the system is OFF, press This button system will ON.
Press this button again, system will enter to Suspend Mode, then press
this button and hold for 4 second, the system will OFF.
Note:
Please make sure the AC Power Switch which on the Power Supply
already switch to ON.(If your Power Supply have AC Power Switch)
2.1.5. CMOS Clear Jumper :
JP12
Clear the CMOS memory by momentarily shorting this Jumper;
then Open the Jumper to retain new setting.
Function
JP12
Clear CMOS
1-2 Close
Normal Operation
2-3 Close
______________________________________________________________
2-5
