GPI05 Power Up
For future used.
Control
KB Power On
Get into the "Enter", then you have to key in your
Password
password, and it will request you to key in again.
(It will "Disable", if your re-confirmed password is not
correct or you just Enter directly.) Then, you have to
save it. After that , under the power off condition, you
can key in the password to power on directly.
(When the electric power of public is not disappear,
then the function will continue.)
re-open the computer directly to key in the password.
Power Up by
When you select Enabled, the following fields appear.
Alarm
They let you set the alarm that returns the system to
Full On state.
The choice: Enabled, Disabled.
Month Alarm
Select a month (1-12) or NA if you want the alarm
active during all month.
Day of Month
Select a date in the month. Select 0(zero) if you prefer
Alarm
to set a weekly alarm (below)
Week Alarm
Turn the alarm On and Off on specific days.
Time (hh:mm:ss)
Set the time you want the alarm to go off on the days
Alarm
when it's activated.
3. Press <ESC> and follow the screen instructions to save or disregard your
settings.
_______________________________________________________________
3-17
【
【
【
【
3
】
】
】
】
__________________________________
3.5 PnP/PCI Configuration Setup
PnP/PCI Configuration Setup configures the PCI bus slots.
Run the Chipset Features Setup as follows:
