User Functions and Settings
Page
43
Complete List of User Functions
This section lists the complete menu of user functions.
The following table shows full Keypad Operations according to users.
√
: User is able to perform this function (GM=grand master or master, U=user, and
In.=installer)
– : User is unable to perform this function
Note:
Although these functions are in the User Functions menu, you can ask your engineer to
program some of them for you
Menu Structure
GM U
In.
Activities
Omit
√
√
-
Zones:
Provides the ability to omit any of the system's intrusion
zones as described on page 37.
One Time only
—
Single omit for the next setting.
Omit Reset
—
Removes any omit(s) previously placed on
an intrusion zone(s).
Omit Recall
—
Recalls the most recent zone omit(s).
Permanent Omit
:
Omits (and resets omitting) any of the
system's intrusion zones permanently. This feature is
different from regular zone omitting. While in regular
omitting, the zone returns to be Not Omitted after it is set,
in permanent omit the zone remains omitted until its
status is changed.
Tamper omit
: Provides the ability to omit bell or box tamper
conditions. If Omit Tamper is selected and a tamper
condition occurs, the tamper LCD icon ( ) will light, there
will be no alarm, no indication to the Alarm Receiving
Centre and no record in the event log.
Note that this feature should be enabled by your engineer.
Outputs
√
√
-
Allows user control of previously designated external devices.
Consult with your engineer as to which outputs can be activated.
If no outputs are defined, this option will not appear on the list.
