User Functions and Settings
Page
41
6.
When you have finished entering the series of characters, ensure that the cursor is
placed in the field after the last character in the series, and press
A
(or the function
key you selected in step 4) again. The series of characters is saved and assigned to the
selected function key
Activating a Macro
Press
/
/
/
on the keypad for two seconds to activate the macro
A
/
B
/
C
/D respectively.
Parking Control with LightSYS2 Gate Control Keyfobs
If your system is equipped with a wireless expander it can support up to 200 keyfobs that
can be used for controlling two outputs for gate and parking control. These keyfobs are
additional to the keyfobs that can be used to control the security applications of the
system. Each keyfob had a dedicated button to support each output.
The grand master or the engineer can control the management of these keyfobs
Notes:
The following procedures are relevant only for stand-alone keyfobs. The keyfobs that
control the security system can be defined and programmed only by your engineer.
Your engineer must define the outputs and the way they will operate so you can perform
the following procedures.
Assign New Keyfob
1.
Press
and enter Grand Master code followed by
.
2.
Using the arrow keys, scroll to the option
Stand Alone KF
and press
.
3.
Select the receiver that you want to assign the keyfob to and press
.
4.
Using the arrow keys, scroll to the
New Keyfob
option and press
.
5.
Press the
key to start the keyfob registration mode.
6.
Press the keyfob
key for 3 seconds.
7.
Repeat step 6 for additional keyfobs. When finished press
to exit registration
mode.
