6
3. Press relative transmitter Trim button to adjust the rudder if the drone tilts to one side
when flying.
Front
Rear
Left
A Blade
Clockwise
B Blade
Counterclockwise
A Blade
Clockwise
B Blade
Counterclockwise
Right
Flying Control
1. Push the Throttle Stick up to fly the drone up,
and pull the Stick down to fly the drone down.
2. Move the Forward/Backward/Left/Right Stick to
the left to fly the drone to the left, and move the
Stick to the right to fly the drone to the right.
3. Push the Forward/Backward/Left/Right Stick up
to fly the drone forward, and pull the Stick down
to fly the drone backward.
4. Move the Throttle Stick to the left to rotate the
drone to the left, and move the Stick to the right
to rotate the drone to the right.
Froward
Backward
Pre-Flight Operation:
1. The power indicator light is the drone rear.
2. Power on the drone and check the direction of the rotating blades. The left front and right
rear blades rotating clockwise while the right front and left rear blades rotating
counterclockwise.
4. Do not push the Throttle Stick before successful calibration. Push the Forward/Backward/
Left/Right Stick as shown below (See Pic 1). The drone body lights flash, which indicates
that the drone is calibrating. When the drone body lights remain solid, turn over the drone
and put it on the flat surface, repeat the operation to push the Forward/Backward/Left/Right
Stick as shown below (See Pic 2). The drone body lights flash,which indicates that the
drone is calibrating. When the drone body lights remain solid, your drone is ready to fly.
Pic 1
Pic 2
Summary of Contents for FREEDOM 3D U32
Page 1: ...U32 ...