Ripmax FREEDOM 3D U32 Manual Download Page 3

3

(2) Keep away from humid environment

The drone inside is consisted of precise electronic components. Humidity or water

vapor may damage electronic components and cause accident.

(3) Safe operation

Please operate the RC drone in accordance with your physical status and flying skill. 

Fatigue, listlessness and improper operation may increase the rate of accident.

(4) Keep away from rotating parts

Rotating Parts can cause serious injury and damage. Keep face and body away from

rotating motors.

(5) Keep away from heat

(6) Please do not touch the hot motor to avoid being burnt.

The RC drone is made of metal, fiber, plastic, electronic components etc. Keep away

from heat and sunshine to avoid distortion and damage.

 Indication Direction of Trim

Indication Direction of Power Switch

(4) We undertakes no liability for those accidents caused by improper operation, use and

      control of the drone after sale of the product.

(5) We has entrusted the distributor to provide technology support and after-sale service. 

      If you have any questions about use, operation, repair etc., please contact your local

      distributor.

2. Safety Precautions:

Keep away from crowd when flying because a flying RC drone is very dangerous. Improper

assembly, broken main frame, defective electronic equipment or unskilled operation all may

cause unpredictable accidents such as drone damage or human injury. Please pay special

attention to safety operation and have good knowledge of accident responsibility that the

user may cause.

(1) Keep away from obstacles and crowd

The speed and status of a flying RC drone is uncertain and it may cause potential danger.

So the user must keep away from crowd, tall building, power lines etc. when operating

a flying RC drone. Do not fly a RC drone in rainy,  storm, thunder and lighting weather

for the safety of user, around people and their property.

(2) This drone is suitable for experienced RC drone user aged 14 years or above.
(3) The flying field must be legally approved by your local government.

Notice:

1. Important Statement:

(1) This product is not a ordinary toy but a piece of complicated equipment which is

      integrated with professional knowledge by mechanic, electronic, air mechanics,

      high-frequency emission etc., so it should be installed and adjusted correctly to avoid

      accidents. The user must always operate in a safe manner.  We undertakes no liability

      for human injury or property damage caused by improper operation as we could not

      control the procedure of installation, use and operation of this drone. 

Return Home Mode

360° Flip Button

Summary of Contents for FREEDOM 3D U32













Reviews: