12
No.
1
Name
No.
Name
No.
Name
Blade Guard
2
A Motor (Red Plug)
3
A Blade
4
B Motor (White Plug)
5
B Blade
6
Battery Box
7
Drone Housing
8
Drone Frame
Troubleshooting Guide
The drone
is under-
powered or
can not fly.
3
1. The blade deformed seriously.
1. Replace blade.
2. The drone battery is too low.
2. Recharge the drone battery.
3. Incorrect installation of blade.
3. Install the blade in accordance with the
user manual instruction.
The drone
can not
hover and
tilts to one
side
4
1. The blade deformed seriously.
1. Replace blade.
2. The drone frame deformed.
2. Replace the drone frame.
3. The gyro did not resetting after violent
crash.
3. Put the drone on the flat ground for
about 10s or restart the the drone to
calibrate again.
4. The motor is damaged.
4. Replace motor.
The drone
indicator
light is off
5
1. The drone battery is too low.
1. Recharge the drone battery.
2. The battery is expired or overdischarge
protection.
2. Buy a new battery from local seller to
replace or recharge the battery.
3. Poor contact.
3. Disconnect the battery and then connect
it with the plug again.
The
transmitter
indicator
light is off
1
Problem
Problem Cause
Solution
No.
1. The transmitter battery is too low.
1. Replace battery.
2. The battery positive pole and negative
pole are in reverse order.
2. Install the battery in accordance with the
user manual.
3. Poor Contact.
3. Clean the dirt between the battery and the
battery alice.
Fail to
pair the
drone with
transmitter
2
1. Indicator light is off.
1. The same as above 1.2.3.
2. There is interfering signal nearby.
2. Restart the drone and power on the
transmitter.
3. Misoperation.
3. Operate the drone step by step in
accordance with the user manual.
4. The electronic component is damaged
for frequent crash.
4. To buy spare parts from local seller and
replace damaged parts.
Exploded View
Summary of Contents for FREEDOM 3D U32
Page 1: ...U32 ...